Thanksgiving is one occasion during which not just the menu and the staff, but also the functioning of a restaurant is tested. More orders received, longer working of kitchen machines, very little time to wash dishes, and frequent operation of cooling machines are all characteristic of the Thanksgiving period. For those restaurants that serve Thanksgiving dinners, offer catering services, or work on an extended holiday schedule, a small breakdown in equipment or in the building system can ruin even the best-laid plans.
Most restaurant managers are gearing up for the rush by securing additional ingredients, getting more staff if necessary, and preparing a workflow plan. However there is one thing that sometimes receives attention only when something goes wrong: the building systems working for the kitchen.
When a kitchen is working at full capacity, it is important for the building systems involved to work well together. The question is not whether one piece of equipment works on an ordinary Tuesday, but whether the entire system will survive the heavy demands put on it during several hours of service.
The Kitchen Exhaust System Has More to Handle Than Smoke
During a busier Thanksgiving service, many cooking devices will be working at the same time over a longer period of time. Ovens, fryers, stoves, and grills will create heat, grease-laden vapors as well as combustion byproducts that have to be extracted.
At the same time, an increase in cooking causes an increase in load on the ventilation system in the kitchen.
The hood that works well under normal conditions will be malfunctioning when the appliances placed under it are overloaded or if they have got some malfunctions. The issue can be caused by grease accumulation, dirty filters, non-functioning fans, or the lack of replacement air.
The replacement air is very important to mention. Any kitchen losing air needs to compensate for the lost air while the replacement should be reasonable. If there is not enough new air or if it is poorly distributed, the issues with hood operation and door performance may arise.
It is necessary to invite an experienced HVAC specialist to estimate the correlation between the kitchen devices, exhaust, incoming air, and the HVAC system as a whole.
Doing this before the holiday season is worth looking into.
Electrical Capacity Becomes More Important When Everything Runs Together
A commercial kitchen seldomly runs all of the kitchen machines at peak capacity simultaneously during normal routine operations except during special occasions like Thanksgiving.
All the appliances like stoves, refrigerators, dishwashers, hot holding cabinets, exhaust fans, and so on may all operate at the same time and the electrical demand resulting from this needs to be treated as an overall operational situation rather than a series of separate equipment installations.
The 2018 Commercial Buildings Energy Consumption Survey conducted by the U.S. Energy Information Administration shows that the total energy consumption of restaurants is 365 trillion Btus.
Electricity accounted for 207 trillion Btus, while natural gas made up another 151 trillion Btus.
The above-mentioned numbers show the significance of buildings in sustaining the operations of restaurants.
Restaurant owners should worry whether the existing electrical distribution has the capacity to sustain the use of the equipment they have.
Before they acquire another stove or a new refrigerator or change any other kitchen equipment, the owners should find out the rate of connected loads, the available panel capacity, and the situation with the circuits. A new unit may fit into the floor area the old one did but its power requirements can be different.
Electrical engineering services are important not only for new construction projects. They help avoid equipment changes leading to unforeseen electrical labor by revealing capacity limitations beforehand.
Additionally, electrical distribution devices, the availability of disconnect switches, and the necessary clearance should be taken into consideration. It is much simpler to fix these issues at this stage than during an emergency repair.
Refrigeration Is Working Even When Nobody Is Cooking
It’s easy to think cooking equipment takes all the focus when it comes to holiday prep, but it is also important to pay attention to refrigeration.
Restaurants rely on walk-in coolers, freezers, reach-in refrigerators, refrigerated prep tables, and ice machines that are essential in keeping food products fresh.
The EIA’s commercial building data indicated that refrigeration represented 15% of the energy consumption for food service buildings in 2018 and is the second highest end use after cooking at 40%.
This serves as a good reminder that refrigeration should not be treated as an afterthought. It plays a key role in food service operations.
Check a few things to spot any problems before they disrupt the service:
- Check the seals of the walk-in cooler and freezer doors.
- Check the condition of evaporator and condenser coils.
- Make sure the temperature controls and monitoring devices work properly.
- Make sure the storage does not overflow.
- Listen closely for any unusual sounds coming from your equipment as well as to its normal cycles.
In addition to this, a number of considerations are involved in the design of restaurants that wish to expand in the future. When selecting refrigeration equipment, it is essential to keep in mind how much storage space is needed and the layout of the kitchen, the amount of heat generated by the kitchen, and the available capacity of the electric system. Refrigeration equipment must be incorporated only when other utilities are also accounted for.
Plumbing and Hot Water Demand Can Become a Bottleneck
A kitchen with a lot of work does not only mean cooking large amounts of food. It is necessary to take into account other aspects such as washing more dishes, cleaning more cooking surfaces, and using water during the day.
A commercial dishwasher and a handwashing sink, as well as a pre-wash sink and a floor drain, influence water consumption. Hot water plays an important role because dishwashing and sanitizing depend on the temperature and performance of the equipment.
According to EIA data, around fifty percent of foodservice buildings operate with large quantities of hot water as part of regular operation such as commercial dishwashing.
If the restaurant is preparing for unusual service, it requires a solution to the question: is the water heating system able to recover fast enough for continuous use?
A water heater that is doing well under normal conditions may not be able to perform adequately if water consumption exceeds recovery level. The problem becomes more evident if we take into consideration that several cycles of cleaning and washing occur simultaneously.
When designing plumbing systems, hot water demand and recovery level, the diameter of pipes, drainage possibilities, and all appliances that will be connected to the system
The functioning of drainage should not be disregarded, either. Floor drains as well as grease traps and management systems must be not only maintained but also run according to the necessary conditions. In the case of a busy service, a blocked drain can turn into more than just a maintenance problem.
Fire Protection Shouldn't Be an Afterthought During Holiday Preparation
With the increase in activity within kitchens, it is increasingly more important to protect against fires.
Commercial cooking appliances create heat and grease; therefore the condition of kitchen extraction systems and fire prevention equipment is a critical factor in this respect.
Restaurants should check whether or not their hood’s extinguishing systems were inspected and are being properly maintained, ensure that fire extinguishers are accessible, and train their staff in actions to take in case of cooking fire.
To ensure efficient fire-fighting, the fire sprinkler design should take into account the layout of the premises, occupancy, and fire fighting requirements.
Kitchen hood systems should not replace sprinkler systems since the function of these two is different.
Changes in kitchen equipment, hood configurations, and room layouts can impact fire protection arrangements, so renovation projects for restaurants should include reviewing these changes rather than assuming that previous arrangements are still suitable.
NFPA, or the National Fire Protection Association, offers guidance for kitchen ventilation and fire protection systems requirements, so owners of restaurants and project teams should ensure compliance of local codes and inspection requirements with any changes made to the kitchen equipment or extraction systems.
What Restaurant Owners and Operators Should Review Before Thanksgiving
A valuable pre-holiday evaluation does not necessarily involve complicated changes in equipment. Generally, such inspection begins with analysis of existing problems and understanding if equipment works correctly.
For operators of restaurants, the following areas are those that should be reviewed:
- Ventilation: Make a check of exhaust hoods, grease filters, fans, make-up air units, and controls.
- Electricity: Inspect the panels, breakers, connections, and equipment load; order the examination of qualified specialists in case of the heat signs and voltage drops.
- Refrigeration: Check the temperature and seals of freezer doors and organize the maintenance in case of any problems.
- Plumbing: Ensure getting hot water and check the performance of dish washers, grease traps, and floor drainage.
- Fire prevention: Make an inspection and ensure that the system of redundancy works properly.
- Equipment operation: Inspect for any signs of malfunction instead of waiting till the failure happens.
For franchise operators who are opening several sites, this is a critical consideration. While using a typical kitchen layout might help them get started, the electrical equipment needed, places to exhaust fumes, utilities involved, and structural aspects may vary from one establishment to another.
A Successful Thanksgiving Service Depends on More Than the Kitchen Team
Restaurant owners have to plan ahead of time for Thanksgiving, including everything from creating menus and ordering food, to making staffing arrangements and finalizing reservations. However, it is worth noting that problems with building systems are often disregarded.
Because issues like problems with air conditioning, electrical capacity problems, or refrigeration problems do not necessarily indicate a major engineering defect.
For restaurant owners, the best way to approach the Thanksgiving preparations is to take this as an opportunity to revisit the infrastructure of day-to-day operations. For developers, architects, and builders, it serves as a reminder of the fact that kitchen capacity should be taken into account along with the supporting systems.
Finally, the Thanksgiving rush lasts only a couple of days, but the impact of foundation infrastructure decisions can be felt throughout the year.